The MMC1 cartridge is the finest from Bang & Olufsen's MMC series.
A good standard cartridge from Bang & Olufsen.
The top of the range cartridge from B&O, this boasted a single crystal sapphire cantilever and a Contact Line stylus derived from the Pramanik stylus of the MMC6000.
MMC20E is fitted with a framed elliptical diamond which has a high polish.
The MMC20EN was the standard cartridge fitted to the top of the line Beogram 4002 and 4004.
MMC20S is a stereo cartridge with a spherical framed diamond.
Send in your used MMC3 cartridge to us and receive a new functional MMC3 cartridge.
The MMC3000 was the basic model in the all new range of cartridges. It was designed for use with the lower end of the range such as the Beogram 1100 and Beocenter 1800 and 3600. It has a spherical diamond stylus.
Send in your used MMC4/MMC5 cartridge to us and receive a new functional MMC4 cartridge.
This cartridge is specially designed for use in Bang & Olufsen record-players with tangential arms.
Send in your used MMC4/MMC5 cartridge to us and receive a new functional MMC5 cartridge.
MMC6000 tracks both mono and stereo records with the utmost fidelity.
For basic and good quality vinyl reproduction. Features a bonded elliptical shaped diamond stylus, mounted to an aluminum cantilever. Tracks at 1.3 grams. For use with MM (Moving Magnet) inputs.
Tracks stereo (and SQ matrix) records. It has a spherical naked diamond stylus and compliance is higher than 25 X 10-6 cm/dyne. Recommended stylus pressure is 1.2 gram.
This highly polished stylus is designed to track the most difficult record grooves of stereo and SQ matrix records. Distortion in difficult treble passages is at an absolute minimum.
This cartridge was made as a replacement for the SP6-7 and matched the earlier arms after the 6/7 was withdrawn. It has a spherical diamond stylus.
An updated SP1-2 which now had the standard 15 degree tracking angle, these cartridges fitted the Beogram 1000 and similar decks.